Network Working GroupJ. Reschke
Internet-Draftgreenbytes
Obsoletes: 2629 (if approved)December 8, 2013
Intended status: Standards Track
Expires: June 11, 2014

The 'XML2RFC' version 2 Vocabulary

draft-reschke-xml2rfc-03

Abstract

This document defines the 'XML2RFC' version 2 vocabulary; an XML-based language used for writing RFCs and Internet-Drafts.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.

This Internet-Draft will expire on June 11, 2014.

Copyright Notice

Copyright © 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Editorial Note (To be removed by RFC Editor)

Discussion of this draft takes place on the XML2RFC mailing list (xml2rfc@ietf.org), which has its home page at <https://www.ietf.org/mailman/listinfo/xml2rfc>.


1. Introduction

This document describes version 2 ('v2') of the 'XML2RFC' vocabulary; an XML-based language ('Extensible Markup Language', [XML]) used for writing RFCs ([RFCSTYLE]) and Internet-Drafts ([IDGUIDE]).

It obsoletes the original version ("v1") [RFC2629], which contained the original language definition, and which was subsequently extended ("v2"). Furthermore, it discusses potential extensions in a future revision ("v3").

Note that the vocabulary contains certain constructs that might not be used when generating the final text; however, they can provide useful data for other uses (such index generation, populating a keyword database, or syntax checks).

1.1. Syntax Notation

The XML vocabulary here is defined in prose, based on the Relax NG schema ([RNC]) contained in Appendix C (specified in Relax NG Compact Notation, "RNC").

Note that the schema can be used for automated validity checks, but certain constraints are only described in prose (example: the conditionally required presence of the "abbrev" attribute).

2. Elements

[rfc.comment.1: In the section below, some elements/attributes do not have a prose description yet. This is because this is work-in-progress; feedback with accurate descriptions is appreciated.]

The sections below describe all elements and their attributes.

Note that attributes not labeled "mandatory" are optional.

2.1. <abstract>

Contains the abstract of the document. The abstract ought to be self-contained and thus should not contain references or unexpanded abbreviations. See Section 4.3 of [RFCSTYLE] for more information.

This element appears as child element of: <front> (Section 2.19).

Content model:

One or more <t> elements (Section 2.38)

2.2. <address>

Provides address information for the author.

This element appears as child element of: <author> (Section 2.6).

Content model:

In this order:

  1. One optional <postal> element (Section 2.27)
  2. One optional <phone> element (Section 2.26)
  3. One optional <facsimile> element (Section 2.16)
  4. One optional <email> element (Section 2.14)
  5. One optional <uri> element (Section 2.42)

2.3. <annotation>

Provides additional prose augmenting a bibliographical reference.

For instance:

<annotation>
  Latest version available at <eref
  target='http://www.w3.org/TR/xml'/>.
</annotation>

...will generate the text used in the reference for [XML].

This element appears as child element of: <reference> (Section 2.30).

Content model:

In any order:

2.4. <area>

Provides information about the IETF area this document applies to (currently not used when generating documents).

This element appears as child element of: <front> (Section 2.19).

Content model: only text content.

2.5. <artwork>

This element allows the inclusion of "artwork" into the document.

<artwork> is the only element in the vocabulary that provides full control of horizontal whitespace and line breaks, and thus is used for a variety of things, such as:

  • diagrams ("line art"),
  • source code,
  • formal languages (such as ABNF or the RNC notation used in this document),
  • complex tables, or
  • protocol unit diagrams.

Alternatively, the "src" attribute allows referencing an external graphics file, such as a bitmap or a vector drawing. In this case, the textual content acts as fallback for output formats that do not support graphics, and thus ought to contain either a "line art" variant of the graphics, or otherwise prose that describes the included image in sufficient detail. Note that RFCs occasionally are published with enhanced diagrams; a recent example is [RFC5598].

This element appears as child element of: <figure> (Section 2.17).

Content model:

Text

2.5.1. 'align' attribute

Controls whether the artwork appears left (default), centered, or right.

Allowed values:

  • "left" (default)
  • "center"
  • "right"

2.5.2. 'alt' attribute

Alternative text description of the artwork (not just the caption).

2.5.3. 'height' attribute

The suggested height of the graphics included using the "src" attribute.

This attribute is format-dependent and ought to be avoided.

When generating HTML output, current implementations copy the attribute "as is". For other output formats it is usually ignored.

2.5.4. 'name' attribute

A filename suitable for the contents (such as for extraction to a local file).

This attribute generally isn't used for document generation, but it can be helpful for other kinds of tools (such as automated syntax checkers which work by extracting the source code).

2.5.5. 'src' attribute

The URI of a graphics file.

Note that this can be a "data" URI ([RFC2397]) as well, in which case the graphics file essentially is in-lined.

2.5.6. 'type' attribute

Specifies the type of the artwork.

The value either is a well-known keyword (such as "abnf"), or an Internet Media Type (see [RFC2046]).

How it is used depends on context and application. For instance, a formatter can attempt to syntax-highlight code in certain known languages.

2.5.7. 'width' attribute

The suggested width of the graphics included using the "src" attribute.

This attribute is format-dependent and ought to be avoided.

When generating HTML output, current implementations copy the attribute "as is". For other output formats it is usually ignored.

2.5.8. 'xml:space' attribute

Determines whitespace handling.

"preserve" is both the default value and the only meaningful setting anyway (because that's what the <artwork> element is for).

See also Section 2.10 of [XML].

Allowed values:

  • "default"
  • "preserve" (default)

2.6. <author>

Provides information about a document author.

The <author> elements contained within the document's <front> element are used to fill the boilerplate, and also to generate the "Author's Address" section (see Section 4.9 of [RFCSTYLE]).

Note that an "author" can also be just an organization (by not specifying any of the name attributes, but adding the <organization> child element).

Furthermore, the "role" attribute can be used to mark an author as "editor". This is reflected both on the front page and in bibliographical references. Note that this specification does not define a precise meaning for the term "editor".

See Section "Authors vs. Contributors" of [RFCPOLICY] for more information.

This element appears as child element of: <front> (Section 2.19).

Content model:

In this order:

  1. One optional <organization> element (Section 2.25)
  2. One optional <address> element (Section 2.2)

2.6.1. 'fullname' attribute

The full name (used in the automatically generated "Author's Address" section).

2.6.2. 'initials' attribute

Author initials (used on the front page and in references).

Initials should be provided as a whitespace separated list of pairs of a letter and a dot.

2.6.3. 'role' attribute

Specifies the role the author had in creating the document.

Allowed values:

  • "editor"

2.6.4. 'surname' attribute

The author's surname.

2.7. <back>

Contains the "back" part of the document: the references and appendices.

This element appears as child element of: <rfc> (Section 2.33).

Content model:

In this order:

  1. Optional <references> elements (Section 2.31)
  2. Optional <section> elements (Section 2.34)

2.8. <c>

Provides the content of a cell in a table.

This element appears as child element of: <texttable> (Section 2.39).

Content model:

In any order:

2.9. <city>

Gives the city name in a postal address.

This element appears as child element of: <postal> (Section 2.27).

Content model: only text content.

2.10. <code>

Gives the postal region code.

This element appears as child element of: <postal> (Section 2.27).

Content model: only text content.

2.11. <country>

Gives the country in a postal address.

This element appears as child element of: <postal> (Section 2.27).

Content model: only text content.

2.12. <cref>

Represents a comment.

Comments can be used in a document while it is work-in-progress. They usually appear either visually highlighted, at the end of the document (depending on file format and settings of the formatter), or not at all (when generating an RFC).

This element appears as child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38).

Content model: only text content.

2.12.1. 'anchor' attribute

[element.cref.attribute.anchor.missing: attribute description missing]

2.12.2. 'source' attribute

Holds the "source" of a comment, such as the name or the initials of the person who made the comment.

2.13. <date>

Provides information about the publication date.

Note that this element is used both for the boilerplate of the document being produced, and also inside bibliographic references.

In the first case, it defines the publication date, which, when producing Internet-Drafts, will be used for computing the expiration date (see Section 8 of [IDGUIDE]). When "year", "month" or "day" are left out, the processor will attempt to use the current system date if the attributes that are specified do match the system date. Note that month names need to match the full (English) month name ("January", "February", "March", "April", "May, "June", "July", "August", "September", "October", "November", or "December") in order for expiration calculations to work.

In the second case, the date information will be embedded as-is into the reference text. Therefore, also vague dates ("ca. 2000"), date ranges, and so on, are allowed.

This element appears as child element of: <front> (Section 2.19).

Content model: this element does not have any contents.

2.13.1. 'day' attribute

Day of publication.

2.13.2. 'month' attribute

Month of publication.

2.13.3. 'year' attribute

Year of publication.

2.14. <email>

Provides an email address.

The value is expected to be the scheme-specific part of a "mailto" URI (so does not include the prefix "mailto:"). See Section 2 of [RFC6068] for details.

This element appears as child element of: <address> (Section 2.2).

Content model: only text content.

2.15. <eref>

Represents an "external" link (as specified in the "target" attribute).

If the element has text content, that content will be used. Otherwise, the value of the target attribute will be inserted in angle brackets ([RFC3986], Appendix C).

This element appears as child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38).

Content model: only text content.

2.15.1. 'target' attribute (mandatory)

URI of the link target (see Section 3 of [RFC3986]).

2.16. <facsimile>

Represents the phone number of a fax machine.

The value is expected to be the scheme-specific part of a "tel" URI (so does not include the prefix "tel:"), using the "global numbers" syntax. See Section 3 of [RFC3966] for details.

This element appears as child element of: <address> (Section 2.2).

Content model: only text content.

2.17. <figure>

[element.figure.missing: element description missing]

This element appears as child element of: <section> (Section 2.34), and <t> (Section 2.38).

Content model:

In this order:

  1. Optional <iref> elements (Section 2.20)
  2. One optional <preamble> element (Section 2.29)
  3. One <artwork> element (Section 2.5)
  4. One optional <postamble> element (Section 2.28)

2.17.1. 'align' attribute

[element.figure.attribute.align.missing: attribute description missing]

Allowed values:

  • "left" (default)
  • "center"
  • "right"

2.17.2. 'alt' attribute

Duplicates functionality available on <artwork>; avoid it.

2.17.3. 'anchor' attribute

[element.figure.attribute.anchor.missing: attribute description missing]

2.17.4. 'height' attribute

Duplicates functionality available on <artwork>; avoid it.

2.17.5. 'src' attribute

Duplicates functionality available on <artwork>; avoid it.

2.17.6. 'suppress-title' attribute

Figures that have an "anchor" attribute will automatically get an autogenerated title (such as "Figure 1"). Setting this attribute to "false" will prevent this.

Allowed values:

  • "true"
  • "false" (default)

2.17.7. 'title' attribute

[element.figure.attribute.title.missing: attribute description missing]

2.17.8. 'width' attribute

Duplicates functionality available on <artwork>; avoid it.

2.18. <format>

Provides a link to an additional format variant for a reference.

Note that these additional links are neither used in published RFCs, nor supported by all tools. If the goal is to provide a single URI for a reference, the "target" attribute on <reference> can be used instead.

This element appears as child element of: <reference> (Section 2.30).

Content model: this element does not have any contents.

2.18.1. 'octets' attribute

Octet length of linked-to document.

2.18.2. 'target' attribute

URI of document.

[rfc.comment.2: Why is this optional?]

2.18.3. 'type' attribute (mandatory)

The type of the linked-to document, such as "TXT", "HTML", or "PDF".

2.19. <front>

Represent the "front matter": metadata (such as author information), abstract, and additional notes.

This element appears as child element of: <reference> (Section 2.30), and <rfc> (Section 2.33).

Content model:

In this order:

  1. One <title> element (Section 2.40)
  2. One or more <author> elements (Section 2.6)
  3. One <date> element (Section 2.13)
  4. Optional <area> elements (Section 2.4)
  5. Optional <workgroup> elements (Section 2.44)
  6. Optional <keyword> elements (Section 2.21)
  7. One optional <abstract> element (Section 2.1)
  8. Optional <note> elements (Section 2.24)

2.20. <iref>

Provides terms for the document's index.

Index entries can be either single items (when just the "item" attribute is given) or nested items (by specifying "subitem" as well).

For instance:

<iref item="Grammar" subitem="item"/>

will produce an index entry for "Grammar, item".

This element appears as child element of: <annotation> (Section 2.3), <c> (Section 2.8), <figure> (Section 2.17), <postamble> (Section 2.28), <preamble> (Section 2.29), <section> (Section 2.34), and <t> (Section 2.38).

Content model: this element does not have any contents.

2.20.1. 'item' attribute (mandatory)

The item to include.

2.20.2. 'primary' attribute

Setting this to "true" declares the occurrence as "primary", which might cause it to be highlighted in the index.

Allowed values:

  • "true"
  • "false" (default)

2.20.3. 'subitem' attribute

The subitem to include.

2.21. <keyword>

Specifies a keyword applicable to the document.

Note that each element should only contain a single keyword; for multiple keywords, the element can simply be repeated.

Keywords are used both in the RFC Index and in the metadata of generated document formats.

This element appears as child element of: <front> (Section 2.19).

Content model: only text content.

2.22. <list>

Delineates a text list.

This element appears as child element of: <t> (Section 2.38).

Content model:

One or more <t> elements (Section 2.38)

2.22.1. 'counter' attribute

[element.list.attribute.counter.missing: attribute description missing]

2.22.2. 'hangIndent' attribute

[element.list.attribute.hangIndent.missing: attribute description missing]

2.22.3. 'style' attribute

[element.list.attribute.style.missing: attribute description missing]

2.23. <middle>

Represents the main content of the document.

This element appears as child element of: <rfc> (Section 2.33).

Content model:

One or more <section> elements (Section 2.34)

2.24. <note>

Creates an unnumbered section that appears after the abstract.

It is usually used for additional information to reviewers (working group information, mailing list, ...), or for additional publication information such as "IESG Notes".

This element appears as child element of: <front> (Section 2.19).

Content model:

One or more <t> elements (Section 2.38)

2.24.1. 'title' attribute (mandatory)

The title of the note.

2.25. <organization>

Specifies the affiliation of an author.

This information appears in both the "Author's Address" section and on the front page ([RFCSTYLE], Section 4.1.2). If the value is long, an abbreviated variant can be specified in the "abbrev" attribute.

This element appears as child element of: <author> (Section 2.6).

Content model: only text content.

2.25.1. 'abbrev' attribute

Abbreviated variant.

2.26. <phone>

Represents a phone number.

The value is expected to be the scheme-specific part of a "tel" URI (so does not include the prefix "tel:"), using the "global numbers" syntax. See Section 3 of [RFC3966] for details.

This element appears as child element of: <address> (Section 2.2).

Content model: only text content.

2.27. <postal>

Contains child elements providing postal information.

This element appears as child element of: <address> (Section 2.2).

Content model:

In this order:

  1. One or more <street> elements (Section 2.37)
  2. In any order:

2.28. <postamble>

Gives text that appears at the bottom of a figure or table.

This element appears as child element of: <figure> (Section 2.17), and <texttable> (Section 2.39).

Content model:

In any order:

2.29. <preamble>

Gives text that appears at the top of a figure or table.

This element appears as child element of: <figure> (Section 2.17), and <texttable> (Section 2.39).

Content model:

In any order:

2.30. <reference>

Represents a bibliographical reference.

This element appears as child element of: <references> (Section 2.31).

Content model:

In this order:

  1. One <front> element (Section 2.19)
  2. Optional <seriesInfo> elements (Section 2.35)
  3. Optional <format> elements (Section 2.18)
  4. Optional <annotation> elements (Section 2.3)

2.30.1. 'anchor' attribute

[element.reference.attribute.anchor.missing: attribute description missing]

2.30.2. 'target' attribute

Holds the URI for the reference.

Note that depending on the <seriesInfo> element, a URI might not be needed, nor desirable, as it can be automatically generated (for instance, for RFCs).

2.31. <references>

Contains a set of bibliographical references.

In the early days of the RFC series, there was only one "References" section per RFC. This convention was later changed to group references into two sets, "Normative" and "Informative"; see item x of Section 4.8 of [RFCSTYLE]). This vocabulary supports the split with the "title" attribute.

This element appears as child element of: <back> (Section 2.7).

Content model:

One or more <reference> elements (Section 2.30)

2.31.1. 'title' attribute

Provides the title for the References section (defaulting to "References").

In general, the title should be either "Normative References" or "Informative References".

2.32. <region>

Provides the region name in a postal address.

This element appears as child element of: <postal> (Section 2.27).

Content model: only text content.

2.33. <rfc>

This is the root element of the xml2rfc vocabulary.

Processors distinguish between RFC mode ("number" attribute being present) and Internet-Draft mode ("docName" attribute being present): it is invalid to specify both. Setting neither "number" nor "docName" can be useful for producing other types of document but is out-of-scope for this specification.

Content model:

In this order:

  1. One <front> element (Section 2.19)
  2. One <middle> element (Section 2.23)
  3. One optional <back> element (Section 2.7)

2.33.1. 'category' attribute

Document category (see Appendix A.1).

Allowed values:

  • "std"
  • "bcp"
  • "info"
  • "exp"
  • "historic"

2.33.2. 'consensus' attribute

Affects the generated boilerplate.

See [RFC5741] for more information.

Allowed values:

  • "no"
  • "yes"

2.33.3. 'docName' attribute

For Internet-Drafts, this specifies the draft name (which appears below the title).

Note that the file extension is not part of the draft, so in general it should end with the current draft number ("-", plus two digits).

Furthermore, it is good practice to disambiguate current editor copies from submitted drafts (for instance, by replacing the draft number with the string "latest").

See Section 7 of [IDGUIDE] for further information.

2.33.4. 'ipr' attribute

Represents the Intellectual Property status of the document. See Appendix A.2 for details.

Allowed values:

  • "full2026"
  • "noDerivativeWorks2026"
  • "none"
  • "full3667"
  • "noModification3667"
  • "noDerivatives3667"
  • "full3978"
  • "noModification3978"
  • "noDerivatives3978"
  • "trust200811"
  • "noModificationTrust200811"
  • "noDerivativesTrust200811"
  • "trust200902"
  • "noModificationTrust200902"
  • "noDerivativesTrust200902"
  • "pre5378Trust200902"

2.33.5. 'iprExtract' attribute

Identifies a Section within the document for which extraction "as-is" is explicitly allowed (only relevant for historic values of the "ipr" attribute).

2.33.6. 'number' attribute

The number of the RFC to be produced.

2.33.7. 'obsoletes' attribute

A comma-separated list of RFC numbers or Internet-Draft names.

2.33.8. 'seriesNo' attribute

When producing a document within document series (such as "STD"): the number within that series.

2.33.9. 'submissionType' attribute

The document stream.

See Section 2 of [RFC5741] for details.

Allowed values:

  • "IETF" (default)
  • "IAB"
  • "IRTF"
  • "independent"

2.33.10. 'updates' attribute

A comma-separated list of RFC numbers or Internet-Draft names.

2.33.11. 'xml:lang' attribute

The natural language used in the document (defaults to "en").

See Section 2.12 of [XML] for more information.

2.34. <section>

Represents a section (when inside a <middle> element) or an appendix (when inside a <back> element).

Sub-sections are created by nesting <section> elements inside <section> elements.

This element appears as child element of: <back> (Section 2.7), <middle> (Section 2.23), and <section> (Section 2.34).

Content model:

In this order:

  1. In any order:
  2. Optional <section> elements (Section 2.34)

2.34.1. 'anchor' attribute

[element.section.attribute.anchor.missing: attribute description missing]

2.34.2. 'title' attribute (mandatory)

The title of the section.

2.34.3. 'toc' attribute

Determines whether the section is included in the Table Of Contents.

[rfc.comment.3: Need to consider inheritance.]

Allowed values:

  • "include"
  • "exclude"
  • "default" (default)

2.35. <seriesInfo>

Specifies the document series in which this document appears, and also specifies an identifier within that series.

This element appears as child element of: <reference> (Section 2.30).

Content model: this element does not have any contents.

2.35.1. 'name' attribute (mandatory)

The name of the series.

The following names trigger specific processing (such as for auto-generating links, and adding descriptions such as "work in progress"): "BCP", "FYI", "Internet-Draft", "RFC", and "STD".

2.35.2. 'value' attribute (mandatory)

The identifier within the series specified by the "name" attribute.

For BCPs, FYIs, RFCs, and STDs this is the number within the series. For Internet-Drafts, it is the full draft name (ending with the two-digit version number).

2.36. <spanx>

[element.spanx.missing: element description missing]

This element appears as child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38).

Content model: only text content.

2.36.1. 'style' attribute

[element.spanx.attribute.style.missing: attribute description missing]

2.36.2. 'xml:space' attribute

Determines whitespace handling.

The default value is "preserve", but that value isn't really suitable for the use cases <spanx> is defined for (so this might change in future versions).

See also Section 2.10 of [XML].

Allowed values:

  • "default"
  • "preserve" (default)

2.37. <street>

Provides a street address.

This element appears as child element of: <postal> (Section 2.27).

Content model: only text content.

2.38. <t>

Contains a paragraph of text.

This element appears as child element of: <abstract> (Section 2.1), <list> (Section 2.22), <note> (Section 2.24), and <section> (Section 2.34).

Content model:

In any order:

2.38.1. 'anchor' attribute

[element.t.attribute.anchor.missing: attribute description missing]

2.38.2. 'hangText' attribute

[element.t.attribute.hangText.missing: attribute description missing]

2.39. <texttable>

Contains a table, consisting of an optional preamble, a header line, rows, and an optional postamble.

This element appears as child element of: <section> (Section 2.34).

Content model:

In this order:

  1. One optional <preamble> element (Section 2.29)
  2. One or more <ttcol> elements (Section 2.41)
  3. Optional <c> elements (Section 2.8)
  4. One optional <postamble> element (Section 2.28)

2.39.1. 'align' attribute

Determines the horizontal alignment of the table.

Allowed values:

  • "left"
  • "center" (default)
  • "right"

2.39.2. 'anchor' attribute

[element.texttable.attribute.anchor.missing: attribute description missing]

2.39.3. 'style' attribute

[element.texttable.attribute.style.missing: attribute description missing]

Allowed values:

  • "all"
  • "none"
  • "headers"
  • "full" (default)

2.39.4. 'suppress-title' attribute

[element.texttable.attribute.suppress-title.missing: attribute description missing]

Allowed values:

  • "true"
  • "false" (default)

2.39.5. 'title' attribute

[element.texttable.attribute.title.missing: attribute description missing]

2.40. <title>

Represents the document title.

When this element appears in the <front> element of the current document, the title might also appear in page headers or footers. If it's long (~40 characters), the "abbrev" attribute is used to specified an abbreviated variant.

This element appears as child element of: <front> (Section 2.19).

Content model: only text content.

2.40.1. 'abbrev' attribute

Specifies an abbreviated variant of the document title.

2.41. <ttcol>

Contains a column heading in a table.

This element appears as child element of: <texttable> (Section 2.39).

Content model: only text content.

2.41.1. 'align' attribute

Determines the horizontal alignment within the table column.

Allowed values:

  • "left" (default)
  • "center"
  • "right"

2.41.2. 'width' attribute

[element.ttcol.attribute.width.missing: attribute description missing]

2.42. <uri>

Contains a web address associated with the author.

The contents should be a valid URI (see Section 3 of [RFC3986]).

This element appears as child element of: <address> (Section 2.2).

Content model: only text content.

2.43. <vspace>

[element.vspace.missing: element description missing]

This element appears as child element of: <t> (Section 2.38).

Content model: this element does not have any contents.

2.43.1. 'blankLines' attribute

[element.vspace.attribute.blankLines.missing: attribute description missing]

2.44. <workgroup>

This element is used to specify the Working Group the document originates from, if any. The recommended format is the official name of the Working Group (with some capitalization).

In Internet-Drafts, this is used in the upper left corner of the boilerplate, replacing the "Network Working Group" string. Formatting software can append the words "Working Group" or "Research Group", depending on the "submissionType" property on the <rfc> element (Section 2.33.9).

This element appears as child element of: <front> (Section 2.19).

Content model: only text content.

2.45. <xref>

[element.xref.missing: element description missing]

This element appears as child element of: <annotation> (Section 2.3), <c> (Section 2.8), <postamble> (Section 2.28), <preamble> (Section 2.29), and <t> (Section 2.38).

Content model: only text content.

2.45.1. 'format' attribute

[element.xref.attribute.format.missing: attribute description missing]

Allowed values:

  • "counter"
  • "title"
  • "none"
  • "default" (default)

2.45.2. 'pageno' attribute

Unused.

It's unclear what the purpose of this attribute is; processors seem to ignore it and it never was documented.

Allowed values:

  • "true"
  • "false" (default)

2.45.3. 'target' attribute (mandatory)

[element.xref.attribute.target.missing: attribute description missing]

3. Special Unicode Code Points

[rfc.comment.4: Explain those code points where the processors implement something special, such as "nbsp".]

4. Internationalization Considerations

[rfc.comment.5: TBD]

5. Security Considerations

[rfc.comment.6: This section is likely incomplete.]

The "name" attribute on the <artwork> element (Section 2.5.4) can be used to derive a filename for saving to a local file system. Trusting this kind of information without pre-processing is a known security risk; see Section 4.3 of [RFC6266] for more information.

Furthermore, all security considerations related to XML processing are relevant as well (see Section 7 of [RFC3470]).

6. IANA Considerations

6.1. Internet Media Type Registration

IANA maintains the registry of Internet media types [BCP13] at <http://www.iana.org/assignments/media-types>.

This document serves as the specification for the Internet media type "application/rfc+xml". The following is to be registered with IANA.

Type name:
application
Subtype name:
rfc+xml
Required parameters:
There are no required parameters.
Optional parameters:
"charset": This parameter has identical semantics as the charset parameter of the "application/xml" media type specified in [RFC3023].
Encoding considerations:
Identical to those of "application/xml" as described in Section 3.2 of [RFC3023].
Security considerations:
As defined in Section 5. In addition, as this media type uses the "+xml" convention, it inherits the security considerations described in Section 10 of [RFC3023].
Interoperability considerations:
N/A
Published specification:
This specification.
Applications that use this media type:
Applications that either transform xml2rfc to output formats such as plain text or HTML, plus additional analysis tools.
Fragment identifier considerations:
The "anchor" attribute is used for assigning document-wide unique identifiers that can be uses as shorthand pointers, as described in Section 2.8 of [XPOINTER].
Additional information:
 
Deprecated alias names for this type:
None.
Magic number(s):
As specified for "application/xml" in Section 3.2 of [RFC3023].
File extension(s):
.xml
Macintosh file type code(s):
TEXT
Person & email address to contact for further information:
See Authors Section.
Intended usage:
COMMON
Restrictions on usage:
N/A
Author:
See Authors Section.
Change controller:
[rfc.comment.7: Good Question -- RSE?]

7. Acknowledgments

Thanks to everybody who reviewed this document and provided feedback and/or specification text, in particular Brian Carpenter, Tony Hansen, Paul Hoffman, Henrik Levkowetz, Alice Russo, Jim Schaad, and Nico Williams.

We also thank Marshall T. Rose for both the original design and the reference implementation of the "xml2rfc" formatter.

8. References

8.1. Normative References

[XML]
Maler, E., Yergeau, F., Paoli, J., Sperberg-McQueen, M., and T. Bray, “Extensible Markup Language (XML) 1.0 (Fifth Edition)”, W3C Recommendation REC-xml-20081126, November 2008, <http://www.w3.org/TR/2008/REC-xml-20081126/>.
Latest version available at <http://www.w3.org/TR/xml>.

8.2. Informative References

[BCP13]
Freed, N., Klensin, J., and T. Hansen, “Media Type Specifications and Registration Procedures”, BCP 13, RFC 6838, January 2013.
[IDGUIDE]
Housley, R., “Guidelines to Authors of Internet-Drafts”, December 2010, <http://www.ietf.org/id-info/guidelines.html>.
[RFC2026]
Bradner, S., “The Internet Standards Process -- Revision 3”, BCP 9, RFC 2026, October 1996.
[RFC2046]
Freed, N. and N. Borenstein, “Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types”, RFC 2046, November 1996.
[RFC2397]
Masinter, L., “The "data" URL scheme”, RFC 2397, August 1998.
[RFC2629]
Rose, M., “Writing I-Ds and RFCs using XML”, RFC 2629, June 1999.
[RFC3023]
Murata, M., St. Laurent, S., and D. Kohn, “XML Media Types”, RFC 3023, January 2001.
[RFC3470]
Hollenbeck, S., Rose, M., and L. Masinter, “Guidelines for the Use of Extensible Markup Language (XML) within IETF Protocols”, BCP 70, RFC 3470, January 2003.
[RFC3966]
Schulzrinne, H., “The tel URI for Telephone Numbers”, RFC 3966, December 2004.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax”, STD 66, RFC 3986, January 2005.
[RFC5598]
Crocker, D., “Internet Mail Architecture”, RFC 5598, July 2009.
PDF version: <http://www.rfc-editor.org/rfc/rfc5598.pdf>
[RFC5741]
Daigle, L. and O. Kolkman, “RFC Streams, Headers, and Boilerplates”, RFC 5741, December 2009.
[RFC6068]
Duerst, M., Masinter, L., and J. Zawinski, “The 'mailto' URI Scheme”, RFC 6068, October 2010.
[RFC6266]
Reschke, J., “Use of the Content-Disposition Header Field in the Hypertext Transfer Protocol (HTTP)”, RFC 6266, June 2011.
[RFCPOLICY]
RFC Editor, “RFC Editorial Guidelines and Procedures”, February 2012, <http://www.rfc-editor.org/policy.html>.
[RFCSTYLE]
Braden, R., Ginoza, S., and A. Hagens, “RFC Document Style (draft 09)”, September 2009, <http://www.rfc-editor.org/rfc-style-guide/rfc-style>.
[RNC]
Clark, J., “RELAX NG Compact Syntax”, OASIS, November 2002, <http://www.oasis-open.org/committees/relax-ng/compact-20021121.html>.
[TLP2.0]
IETF Trust, “Legal Provisions Relating to IETF Documents”, February 2009, <http://trustee.ietf.org/license-info/IETF-TLP-2.htm>.
[TLP3.0]
IETF Trust, “Legal Provisions Relating to IETF Documents”, September 2009, <http://trustee.ietf.org/license-info/IETF-TLP-3.htm>.
[TLP4.0]
IETF Trust, “Legal Provisions Relating to IETF Documents”, December 2009, <http://trustee.ietf.org/license-info/IETF-TLP-4.htm>.
[XPOINTER]
Grosso, P., Maler, E., Marsh, J., and N. Walsh, “XPointer Framework”, W3C Recommendation REC-xptr-framework-20030325, March 2003, <http://www.w3.org/TR/2003/REC-xptr-framework-20030325/>.
Latest version available at <http://www.w3.org/TR/xptr-framework/>.

A. Front Page Generation

A.1. The /rfc/@category Attribute

For RFCs, the category determines the "maturity level" (see Section 4 of [RFC2026]). The allowed values are "std" for "Standards Track", "bcp" for "BCP", "info" for "Informational", "exp" for "Experimental", and "historic" for - surprise - "Historic".

For Internet-Drafts, the category attribute is not needed, but will appear on the front page as "Intended Status". Supplying this information can be useful to reviewers.

A.2. The /rfc/@ipr Attribute

This attribute value can take a long list of values, each of which describes an IPR policy for the document. This attribute's values are not the result of a grand plan, but remain simply for historic reasons. Of these values, only a few are currently in use; all others are supported by the various tools for backwards compatibility with old source files.

Disclaimer: THIS ONLY PROVIDES IMPLEMENTATION INFORMATION. IF YOU NEED LEGAL ADVICE, PLEASE CONTACT A LAWYER. For further information, refer to <http://trustee.ietf.org/docs/IETF-Copyright-FAQ.pdf>.

For the current "Status Of This Memo" text, the submissionType attribute determines whether a statement about "Code Components" is inserted (which is the case for the value "IETF", which is the default). Other values, such as "independent", suppress this part of the text.

A.2.1. Current Values: '*trust200902'

The name for these values refers to the "IETF TRUST Legal Provisions Relating to IETF Documents", sometimes simply called the "TLP, that went into effect on February 15, 2009 ([TLP2.0]). Updates to this document were published on September 12, 2009 ([TLP3.0]) and on December 28, 2009 ([TLP4.0]), modifying the license for code components (see <http://trustee.ietf.org/license-info/> for further information). The actual text is located in Section 6 ("Text To Be Included in IETF Documents") of these documents.

The tools will automatically produce the "correct" text depending on the document's date information (see above):

TLPstarting with publication date
[TLP3.0]2009-11-01
[TLP4.0]2010-04-01
A.2.1.1. trust200902

This should be the default, unless one of the more specific '*trust200902' values is a better fit. It produces the text in Sections 6.a and 6.b of the TLP.

A.2.1.2. noModificationTrust200902

This produces additional text from Section 6.c.i of the TLP:

This document may not be modified, and derivative works of it may not be created, except to format it for publication as an RFC or to translate it into languages other than English.

A.2.1.3. noDerivativesTrust200902

This produces the additional text from Section 6.c.ii of the TLP:

This document may not be modified, and derivative works of it may not be created, and it may not be published except as an Internet-Draft.

A.2.1.4. pre5378Trust200902

This produces the additional text from Section 6.c.iii of the TLP, frequently called the "pre-5378 escape clause":

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.

See Section 4 of <http://trustee.ietf.org/docs/IETF-Copyright-FAQ.pdf> for further information about when to use this value.

A.2.2. Historic Values

A.2.2.1. Historic Values: '*trust200811'

The attribute values "trust200811", "noModificationTrust200811" and "noDerivativesTrust200811" are similar to their "trust200902" counterparts, except that they use text specified in <http://trustee.ietf.org/license-info/archive/IETF-Trust-License-Policy_11-10-08.pdf>.

A.2.2.2. Historic Values: '*3978'

The attribute values "full3978", "noModification3978" and "noDerivatives3978" are similar to their counterparts above, except that they use text specified in RFC 3978 (March 2005).

A.2.2.3. Historic Values: '*3667'

The attribute values "full3667", "noModification3667" and "noDerivatives3667" are similar to their counterparts above, except that they use text specified in RFC 3667 (February 2004).

A.2.2.4. Historic Values: '*2026'

The attribute values "full2026" and "noDerivativeWorks2026" are similar to their counterparts above, except that they use text specified in RFC 2026 (October 1996).

The special value "none" was also used back then, and denied the IETF any rights beyond publication as Internet-Draft.

B. Changes from RFC 2629 ('v1')

[v1diff: See <http://greenbytes.de/tech/webdav/draft-reschke-xml2rfc-02.html#rfc.section.E> for a comparison of the schemata.]

B.1. Removed Elements

The <appendix> element has been removed; to generate an appendix, place a <section> inside <back>.

B.2. Changed Defaults

Many attributes have lost their "default" value; this is to avoid having document semantics differ based on whether a DTD was specified and evaluated. Processors will handle absent values the way the default value was specified before.

B.3. Changed Elements

<artwork>: Has a set of new attributes: "name", "type", "src", "align", "alt", "width", and "height". (Section 2.5)

<author>: The <organization> element is now optional. The "role" attribute was added. (Section 2.6)

<country>: The requirement to use ISO 3166 codes was removed. (Section 2.11)

<date>: All attributes are now optional. (Section 2.13)

<figure>: Has a set of new attributes: "suppress-title", "src", "align", "alt", "width", and "height". (Section 2.17)

<iref>: Has a new "primary" attribute. (Section 2.20)

<list>: The "style" attribute isn't restricted to a set of enumerated values anymore. The "hangIndent" and "counter" attributes have been added. (Section 2.22)

<rfc>: The "ipr" attribute has gained additional values. The attributes "consensus", "iprExtract", "submissionType", and "xml:lang" have been added. (Section 2.33)

<reference>: <annotation> allows adding prose to a reference. (Section 2.30)

<references>: Can now appear multiple times, and carry a "title" attribute (so that normative and informative references can be split). (Section 2.31)

<section>: The new "toc" attribute controls whether it will appear in the Table Of Contents. <iref> can now appear as direct child element. (Section 2.34)

<t>: The "anchor" attribute can now be used as well, however there are restrictions on how they can be referred to. (Section 2.38)

B.4. New Elements

The following elements have been added: <annotation> (Section 2.3), <c> (Section 2.8), <cref> (Section 2.12), <format> (Section 2.18), <spanx> (Section 2.36), <texttable> (Section 2.39).

C. Relax NG Schema

namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"

rfc =
  element rfc {
    attribute number { text }?,
    [ a:defaultValue = "" ] attribute obsoletes { text }?,
    [ a:defaultValue = "" ] attribute updates { text }?,
    attribute category { "std" | "bcp" | "info" | "exp" | "historic" 
}?,
    attribute consensus { "no" | "yes" }?,
    attribute seriesNo { text }?,
    attribute ipr {
      "full2026"
      | "noDerivativeWorks2026"
      | "none"
      | "full3667"
      | "noModification3667"
      | "noDerivatives3667"
      | "full3978"
      | "noModification3978"
      | "noDerivatives3978"
      | "trust200811"
      | "noModificationTrust200811"
      | "noDerivativesTrust200811"
      | "trust200902"
      | "noModificationTrust200902"
      | "noDerivativesTrust200902"
      | "pre5378Trust200902"
    }?,
    attribute iprExtract { xsd:IDREF }?,
    [ a:defaultValue = "IETF" ]
    attribute submissionType {
      "IETF" | "IAB" | "IRTF" | "independent"
    }?,
    attribute docName { text }?,
    [ a:defaultValue = "en" ] attribute xml:lang { text }?,
    front,
    middle,
    back?
  }
front =
  element front {
    title, author+, date, area*, workgroup*, keyword*, abstract?, 
note*
  }
title =
  element title {
    attribute abbrev { text }?,
    text
  }
author =
  element author {
    attribute initials { text }?,
    attribute surname { text }?,
    attribute fullname { text }?,
    attribute role { "editor" }?,
    organization?,
    address?
  }
organization =
  element organization {
    attribute abbrev { text }?,
    text
  }
address = element address { postal?, phone?, facsimile?, email?, 
uri? }
postal = element postal { street+, (city | region | code | country)* 
}
street = element street { text }
city = element city { text }
region = element region { text }
code = element code { text }
country = element country { text }
phone = element phone { text }
facsimile = element facsimile { text }
email = element email { text }
uri = element uri { text }
date =
  element date {
    attribute day { text }?,
    attribute month { text }?,
    attribute year { text }?,
    empty
  }
area = element area { text }
workgroup = element workgroup { text }
keyword = element keyword { text }
abstract = element abstract { t+ }
note =
  element note {
    attribute title { text },
    t+
  }
middle = element middle { section+ }
section =
  element section {
    attribute anchor { xsd:ID }?,
    attribute title { text },
    [ a:defaultValue = "default" ]
    attribute toc { "include" | "exclude" | "default" }?,
    (t | figure | texttable | iref)*,
    section*
  }
t =
  element t {
    attribute anchor { xsd:ID }?,
    attribute hangText { text }?,
    (text
     | \list
     | figure
     | xref
     | eref
     | iref
     | cref
     | spanx
     | vspace)*
  }
\list =
  element list {
    attribute style { text }?,
    attribute hangIndent { text }?,
    attribute counter { text }?,
    t+
  }
xref =
  element xref {
    attribute target { xsd:IDREF },
    [ a:defaultValue = "false" ] attribute pageno { "true" | "false" 
}?,
    [ a:defaultValue = "default" ]
    attribute format { "counter" | "title" | "none" | "default" }?,
    text
  }
eref =
  element eref {
    attribute target { text },
    text
  }
iref =
  element iref {
    attribute item { text },
    [ a:defaultValue = "" ] attribute subitem { text }?,
    [ a:defaultValue = "false" ]
    attribute primary { "true" | "false" }?,
    empty
  }
cref =
  element cref {
    attribute anchor { xsd:ID }?,
    attribute source { text }?,
    text
  }
spanx =
  element spanx {
    [ a:defaultValue = "preserve" ]
    attribute xml:space { "default" | "preserve" }?,
    [ a:defaultValue = "emph" ] attribute style { text }?,
    text
  }
vspace =
  element vspace {
    [ a:defaultValue = "0" ] attribute blankLines { text }?,
    empty
  }
figure =
  element figure {
    attribute anchor { xsd:ID }?,
    [ a:defaultValue = "" ] attribute title { text }?,
    [ a:defaultValue = "false" ]
    attribute suppress-title { "true" | "false" }?,
    attribute src { text }?,
    [ a:defaultValue = "left" ]
    attribute align { "left" | "center" | "right" }?,
    [ a:defaultValue = "" ] attribute alt { text }?,
    [ a:defaultValue = "" ] attribute width { text }?,
    [ a:defaultValue = "" ] attribute height { text }?,
    iref*,
    preamble?,
    artwork,
    postamble?
  }
preamble =
  element preamble { (text | xref | eref | iref | cref | spanx)* }
artwork =
  element artwork {
    [ a:defaultValue = "preserve" ]
    attribute xml:space { "default" | "preserve" }?,
    [ a:defaultValue = "" ] attribute name { text }?,
    [ a:defaultValue = "" ] attribute type { text }?,
    attribute src { text }?,
    [ a:defaultValue = "left" ]
    attribute align { "left" | "center" | "right" }?,
    [ a:defaultValue = "" ] attribute alt { text }?,
    [ a:defaultValue = "" ] attribute width { text }?,
    [ a:defaultValue = "" ] attribute height { text }?,
    text*
  }
postamble =
  element postamble { (text | xref | eref | iref | cref | spanx)* }
texttable =
  element texttable {
    attribute anchor { xsd:ID }?,
    [ a:defaultValue = "" ] attribute title { text }?,
    [ a:defaultValue = "false" ]
    attribute suppress-title { "true" | "false" }?,
    [ a:defaultValue = "center" ]
    attribute align { "left" | "center" | "right" }?,
    [ a:defaultValue = "full" ]
    attribute style { "all" | "none" | "headers" | "full" }?,
    preamble?,
    ttcol+,
    c*,
    postamble?
  }
ttcol =
  element ttcol {
    attribute width { text }?,
    [ a:defaultValue = "left" ]
    attribute align { "left" | "center" | "right" }?,
    text
  }
c = element c { (text | xref | eref | iref | cref | spanx)* }
back = element back { references*, section* }
references =
  element references {
    [ a:defaultValue = "References" ] attribute title { text }?,
    reference+
  }
reference =
  element reference {
    attribute anchor { xsd:ID }?,
    attribute target { text }?,
    front,
    seriesInfo*,
    format*,
    annotation*
  }
seriesInfo =
  element seriesInfo {
    attribute name { text },
    attribute value { text },
    empty
  }
format =
  element format {
    attribute target { text }?,
    attribute type { text },
    attribute octets { text }?,
    empty
  }
annotation =
  element annotation { (text | xref | eref | iref | cref | spanx)* }
start = rfc

(This schema was derived from version 1.3.6 of the xml2rfc DTD ('Document Type Definition', [XML], Section 2.8), available from <http://svn.tools.ietf.org/svn/tools/xml2rfc/spec-v2/02/xml2rfcv2.dtd>).

D. Proposed Future Changes for 'v3'

Discussion of "v3" changes takes place on the rfc-interest mailing list (rfc-interest@rfc-editor.org), which has its home page at <http://www.rfc-editor.org/mailman/listinfo/rfc-interest>. See also <https://www.rfc-editor.org/rse/wiki/doku.php?id=design:xml-tags> for a related Wiki page.

D.1. Contact Information

If contact information is changed to allow non-ASCII characters: add a place for a ASCII fallback (probably just for the author names).

The content model for <postal> ought to be more strict to allow at most one of <city>, <region>, <code>, and <country>.

It should be possible to have multiple <email> and <uri> elements (see also <http://trac.tools.ietf.org/tools/xml2rfc/trac/ticket/36>).

<facsimile> looks outdated, while a container for IM (messaging) URIs is missing. Maybe this area needs to be aligned with vCard.

Section 4.8 of [RFCSTYLE] hints at a "Contributors" Section that could supply contact information similar to the one in the auto-generated "Authors' Address" Section. Consider how to capture contributor contact information (probably not using <author> to avoid confusion). Furthermore, consider ways to augment the contact information section with prose.

D.2. Figures

Cleanup the set of overlapping attributes between <figure> and <artwork>.

For artwork that consists of a sequence of items (such as messages in a protocol example), it would be good if a <figure> element could contain multiple <artwork> elements (to assist code to find good places for page breaks).

Extend <figure> to support different types of artwork (such as by specifying certain type attribute values, see <http://greenbytes.de/tech/webdav/rfc2629xslt/rfc2629xslt.html#artwork.types>), and also avoid having to markup code (such as ABNF) as "artwork".

It would be good if "code components" could be marked as such.

Finally, even in preformatted text use of markup could be useful to support (a) references, or (b) highlighting the important bits (<http://greenbytes.de/tech/webdav/rfc2629xslt/rfc2629xslt.html#ext-rfc2629.artwork>).

D.3. Linking

Extend <xref> so that subsection/anchors can be specified (see <http://greenbytes.de/tech/webdav/rfc2629xslt/rfc2629xslt.html#ext-rfc2629.xref>). Remove the "pageno" attribute which seems to be both undocumented and non-functional.

D.4. Lists

Allow multiple paragraphs in list items; eliminating the need to use <vspace> (see <http://greenbytes.de/tech/webdav/rfc2629xslt/rfc2629xslt.html#ext.element.lt>).

D.5. References

Allow overriding the "anchor" attribute of an included <reference> element.

Add a way to add prose to a reference that avoids abuse of <seriesInfo>.

Allow <reference>s that identify a document set such as a BCP.

Deprecate or remove the <format> element; right now it's not used for the generation of the plain text document anyway.

It is unclear why the "anchor" attribute is optional.

D.6. Archival Considerations

When this vocabulary becomes the canonical RFC format, it will need to be able to capture all generated information, such as section/figure/table numbers, plus any auto-generated boilerplate (copyright statements etc.).

D.7. Document Metadata

Extend the concept of language tagging to at least examples and contact information to address potential japanese/chinese font confusion.

Provide a way to indicate the intended level on the standards track.

Include feedback information in a way so that generated documents can provide usable feedback links (see <http://greenbytes.de/tech/webdav/rfc2629xslt/rfc2629xslt.html#ext.element.feedback>).

D.8. Misc.

Make the <date> element optional; all of its content is optional already.

<spanx> has both a weird whitespace model ("preserve") and problematic styling. Consider to deprecate it in favor of elements such as <em> and <code> (where the name "code" is already in use for region codes).

Indented paragraphs currently can be created by abusing the <list>. It would be good to have a special element for this purpose.

The content model for <cref> should be extended to allow more flow elements, such as <xref> and <eref>.

Section titles should really be elements, not attributes (this would allow them to contain markup).

Text tables are currently very constrained. For instance, it would be good if alignment of headers and table cells could be de-coupled <http://trac.tools.ietf.org/tools/xml2rfc/trac/ticket/69>).

Counters are currently restricted to lists, figures, and tables. Maybe there should be a generic mechanism that is not directly tied to other elements <http://trac.tools.ietf.org/tools/xml2rfc/trac/ticket/68>).

Index

A B C D E F H I K L M N O P R S T U V W X Y

Author's Address

Julian F. Reschke
greenbytes GmbH
Hafenweg 16
Muenster, NW 48155
Germany
Email: julian.reschke@greenbytes.de
URI: http://greenbytes.de/tech/webdav/